Air-to-water

R32 DC inverter heat pumps

One monobloc platform in four sizes. The refrigerant circuit stays inside the outdoor unit; the building side carries only water, for heating, cooling and domestic hot water.

Renova RV DC inverter series R32 air-to-water heat pump, outdoor monobloc unit

RENOVA R32 DC Inverter Series

13 / 19 / 21 / 25 kW class · heating, cooling and domestic hot water

Mitsubishi DC inverter compressor modulates output with the load instead of cycling at full power
Designed for heating in outdoor temperatures down to −20 °C, subject to operating conditions and system design
Water up to 55 °C for underfloor heating, fan coils, low-temperature radiators and hot water cylinders
7-inch multilingual touchscreen, Wi-Fi and an SG Ready interface for energy management and solar PV

RV-13-DC-R32

Class: 13 kW
Heating capacity range: 4 – 13.8 kW
Heating capacity, A7/W35: 12.2 kW
COP, A7/W35: 4.80
Cooling capacity (nominal): 11.1 kW
Maximum current: 18 A
Nominal water flow: 2.1 m³/h
Net weight: 125 kg

Full specifications

RV-19-DC-R32

Class: 19 kW
Heating capacity range: 4 – 18 kW
Heating capacity, A7/W35: 16.1 kW
COP, A7/W35: 4.37
Cooling capacity (nominal): 13.3 kW
Maximum current: 23 A
Nominal water flow: 2.8 m³/h
Net weight: 140 kg

Full specifications

RV-21-DC-R32

Class: 21 kW
Heating capacity range: 6 – 22 kW
Heating capacity, A7/W35: 20.0 kW
COP, A7/W35: 4.41
Cooling capacity (nominal): 16.4 kW
Maximum current: 28 A
Nominal water flow: 3.4 m³/h
Net weight: 150 kg

Full specifications

RV-25-DC-R32

Class: 25 kW
Heating capacity range: 8 – 25 kW
Heating capacity, A7/W35: 23.0 kW
COP, A7/W35: 4.51
Cooling capacity (nominal): 20.1 kW
Maximum current: 36 A
Nominal water flow: 4.0 m³/h
Net weight: 160 kg

Full specifications

Across the RV series

Refrigerant: R32
Compressor: Mitsubishi DC inverter
Maximum water temperature: 55 °C
Heating operation down to: −20 °C outdoor
Controller: 7-inch touchscreen, multilingual
Connectivity: Wi-Fi · SG Ready

Heating capacity and COP at A7/W35: outdoor air 7 °C, water outlet 35 °C. Both fall as the outdoor temperature drops or the water temperature rises. Cooling figures are the manufacturer's nominal ratings. Nominal water flow corresponds to the rated heating output at a 5 K flow/return difference. Compare all four models.

Technology

Built into every model

Mitsubishi DC inverter compressor

Variable compressor speed follows the heat demand instead of switching on and off at full power.

SG Ready

A two-input energy-management interface: an energy manager or PV system can lock, release or boost operation.

Wi-Fi and 7-inch touchscreen

Multilingual touchscreen control of heating, cooling, hot water and schedules, with remote monitoring and control over Wi-Fi.

Smart Home Ready

Integration through the controller's available interfaces and the SG Ready inputs; the automation architecture decides what is possible.

Automatic defrost

Clears frost from the outdoor coil in cold, humid weather to restore heat transfer.

Cold-climate operation

Heating operation down to −20 °C outdoor, with capacity and COP that change with conditions.

R32 refrigerant

Single-component refrigerant with a GWP of 675, a third of R410A's.

Applications

Designed around the emitters

Underfloor heatingLow flow temperatures give a heat pump its best seasonal efficiency.

Fan coilsOne set of terminals for heating in winter and cooling in summer.

Low-temperature radiatorsOutput depends on water temperature and radiator size, so check the numbers first.

Domestic hot waterA cylinder on a diverting valve, with hot water priority.

Solar PV integrationStore surplus PV generation as heat, signalled through SG Ready.

Talk to an engineer about your project

Send the building details, location and the emitters you plan to use. We come back with a model proposal and a quotation.

Request a quote Talk to an engineer